The new Masterplat control panel combines the Master Jog Dial with graphic display to make it easy to set up and to select the correct wrapping parameters for each of your loads.
The Masterplat’s NEMA 12 Enclosure protects against dust, dirt, fibers and lint. It also protects from dripping water, external condensation and other noncorrosive liquids. The Masterplat control panel is UL508A Certified.
Turn and Push
Control panel has been completely redesigned with a monochrome graphic display and 3-inch multi-function button (JOG) used for setting and adjusting functions. This panel allows you to create and store three different programs quickly and easily.
Functions available from control panel.
ONLY UPWARD OR ONLY DOWNWARD CYCLE
TOP SHEET CYCLE
DELAY PHOTOCELL SETTING
START FROM GROUND LEVEL
3 PROGRAM RECORDABLE
ROTATION SPEED SETTING
UPWARD/ DOWNWARD SPEED CARRIEGE SETTING
UP, DOWN AND REINFORCE CYCLE SETTING
UPWARD/ DOWNWARD FILM TENSIONING (FR, PDS)
UPWARD/ DOWNWARD PRESTRETCH SETTING (ONLY PDS)
F1 PROGRAM EXTRA PALLET
F2 PROGRAM CYLINDRICAL PRODUCTS
PARTIAL AND TOTAL CYCLES COUNTER
CONTROL PANEL LOCK