Rotoplat LP AS 507 PFS

	CLAMPING, CUTTING AND SEALING SYSTEM The innovative clamp and cut unit is based on a pneumatic system and delivers high precision and reliable performances by executing each operation step by step. The integrated sealing unit on the LP AS machines is able to seal the film at the end of each wrapping cycle and ensures the absence of any tail. The clamp unit allows the machine to be always ready for the next cycle. All these operations can run manually.
	CONTROL PANEL The control panel is equipped with a practical alert system that detects and locate where maintenance/action might be needed. CONTROL DESCRIPTION A= STOP B= START C= RESET D= CARRIAGE DESCENT E= PRESSURE UP/DOWN F= CARRIAGE STOP PARAMETERS DESCRIPTION Table rotation speed Film tensioning Carriage up/down speed Film tension upward/downward Bottom wrap and top wrap Film pre-stretch Photocell delay Sealing time CYCLE DESCRIPTION Top sheet cycle Pressure cycle 4 programs with parameters defined by the operator
	PFS SPOOL CARRIAGE Spool carriage with powered frictioned pre-stretch system. Pre-stretch ratio adjustable on control panel from 0% up to 250% by electromagnetic brake. Force to load controlled by patented electronic device and adjustable from panel board.
	REMOTE CONTROL KIT The LP AS is equipped with a remote control unit that allows the operator to start the wrapping cycle without getting of the forklift.

ROTOPLAT LP AS 507 PFS-Automatic turntable with clamp-cut and sealing unit
Carriage	PFS: Variable power pre-stretch with force to load electronic control
Machine Characteristics
Plate diameter		1650 mm
Turntable rotation speed:		4-12 rpm
Forklifting		Front and Rear
Power supply voltage		230 Volt 1 Ph - 50/60 Hz
Installed power		3.1 kW
Pre-stretch ratio		0-250%
Phase stopping		(+/-20 mm)
Soft start		STD
Remotely control cycle start		STD
Automatic clamp cut and sealing unit		STD
Characteristics of the product to be wrapped
Maximum dimensions (LxW)		1000 x 1200 mm
Maximum useful height:		2200 mm
Maximum load weight:		2000 Kg
Film spool characteristics
Max. external diameter (D):		300 mm
Film spool height (h):		500 mm
Film thickness:		17-35 µm
Internal diameter (d):		76 mm
Max. weight:		20 kg

Personal Data

I would like to be contacted

Phone
E-mail
Mail
I would like receive the newsletter
Authorisation By filling in and sending this module, I hereby authorise the processing of the personal data I provide, for the purpose indicated in point a) above, in the manner and within the limits indicated by the information contained herein, in compliance with and by effect of art. 23 of Legislative Decree 196/03.

+/-