Superbox
Automatic cardborad case erector
Robopac presents an automatic carton forming machine with a high output and a long lifespan. The new SUPERBOX forming machine retrieves the cardboard blanks, opens, folds and forms the boxes and then seals the bottom with tape. This highly versatile machine can use tape rolls of the kind commonly found on the market. The machine is composed of a blanks magazine, a section where the cartons are opened, and a discharge roller where the cartons are taped at the base.Format changeovers are easily done using 5 handwheels and adjusting the strikes in the blanks magazine and the position of the suction caps. Three versions are currently available — Superbox 544, 545 and 645.
+/-
Distinguishing marks
 | STORAGE UNIT |
 | SUCTION CUPS UNIT |
 | BOTTOM TAPING UNIT |
Layout
Technical specifications
| SUPERBOX 544- Automatic case erector | |
| | |
| Machine Characteristics | |
| Product capacity (format depends) | 600 pieces /hour |
| Standard feed storage unit (50/60 cardboard) | STD |
| Installed power: | 1 KW |
| Pressure required: | 6 + 1 bar |
| Compressed air consumption | 350 Nl/1' |
| PLC: | Mitsubishi |
| Power supply | 400 V. 3-ph -50HZ +T |
| Characteristics of the product to be wrapped | |
| Minimum product size (LxWxH) | 250 x 170 x 90 mm |
| Maximum product size (LxWxH) | 540 x 400 x 400 mm |
| Taping characteristics | |
| Tape type | PVC or PPL |
| Maximum external diameter (D) mm: | 400 mm |
| Inside diameter (d): | 76,2 mm |
| Width (w): | 25-50 mm with head T50, 25-75 mm for T75 |
| SUPERBOX 545- Automatic case erector | |
| | |
| Machine Characteristics | |
| Product capacity (format depends) | 600 pieces /hour |
| Standard feed storage unit (50/60 cardboard) | STD |
| Installed power: | 1 KW |
| Pressure required: | 6 + 1 bar |
| Compressed air consumption | 350 Nl/1' |
| PLC: | Mitsubishi |
| Power supply | 400 V. 3-ph -50HZ +T |
| Characteristics of the product to be wrapped | |
| Minimum product size (LxWxH) | 250 x 170 x 90 mm (*) |
| Maximum product size (LxWxH) | 570 x 410 x 500 mm (if L = 570 mm H = 90 mm => W min. ≥ 300 mm) (if L = 570 mm W = 410 mm => H min. ≥ 170 mm) |
| Taping characteristics | |
| Tape type | PVC or PPL |
| Maximum external diameter (D) mm: | 400 mm |
| Inside diameter (d): | 76,2 mm |
| Width (w): | 25-50 mm with head T50, 25-75 mm for T75 |
| SUPERBOX 645- Automatic case erector | |
| | |
| Machine Characteristics | |
| Product capacity (format depends) | 600 pieces /hour |
| Standard feed storage unit (50/60 cardboard) | STD |
| Installed power: | 1 KW |
| Pressure required: | 6 + 1 bar |
| Compressed air consumption | 350 Nl/1' |
| PLC: | Mitsubishi |
| Power supply | 400 V. 3-ph -50HZ +T |
| Characteristics of the product to be wrapped | |
| Minimum product size (LxWxH) | 250 x 200 x 200 mm |
| Maximum product size (LxWxH) | 600 x 410 x 500 mm |
| Taping characteristics | |
| Tape type | PVC or PPL |
| Maximum external diameter (D) mm: | 400 mm |
| Inside diameter (d): | 76,2 mm |
| Width (w): | 25-50 mm with head T50, 25-75 mm for T75 |
P.I. 02691590406
Acanto
Websolute